Timber · Signature Range · Engineered
LUXplank Engineered
Premium engineered wide-plank · Matte low-sheen · 10 curated tones
The studio's signature engineered oak range. Sawn from FSC-certified oak, pressed onto a cross-bonded plywood core for dimensional stability across Sydney's humidity range, and finished with a wire brush that opens the grain before a UV-cured matte oil is drawn in. Ten tones — from bleached Scandi to near-black Mono — allow one range to carry an entire home.
10 colours
Indicative pricing band $$$ · formal quote on request
Technical specification
What sits beneath the finish.
- Species
- Oak
- Construction
- Engineered · 3-ply cross-bonded
- Wear layer
- 4 mm sawn oak
- Total thickness
- 15 mm
- Board width
- 220 mm wide-plank
- Board length
- up to 2200 mm (mixed lengths)
- Grade
- ABCD · natural oak character
- Surface treatment
- Wire-brushed · matte oil (low-sheen)
- Colour count
- 10 curated tones
- Janka hardness
- 4.9 kN
- Install method
- Glue-down (recommended) or T&G floating
- Underfloor heating
- Yes · max 27 °C surface
Care & maintenance
How this floor ages well.
- 01Vacuum weekly with soft-brush attachment or micro-fibre mop dry.
- 02Damp-mop with a pH-neutral timber cleaner every 2–4 weeks — never wet-mop or use vinegar/ammonia.
- 03Wipe spills within 60 seconds — timber tolerates moisture briefly, not standing water.
- 04Re-oil high-traffic areas every 3–5 years to refresh matte finish.
- 05Sand & recoat the whole floor once every 15–25 years — engineered floors accept 2–3 sandings.
Where it works best
Application by room.
- Whole-house specification
- Living rooms
- Bedrooms
- Kitchens
- Hallways
Warranty
25-year residential structural · 10-year residential wear
Sustainability
FSC/PEFC-certified oak · low-VOC UV-cured finish · engineered format uses ~60% less prime oak than solid boards
From the same element
