Timber · Wide-plank · Blonde
Oak · Natural
Wire-brushed · Matte oil
Oak (Quercus robur / Quercus petraea) harvested under FSC or PEFC chain-of-custody. Sawn, kiln-dried and pressed onto stable birch-poplar plywood cores in Europe (predominantly Poland, Croatia and Serbia), then finished with a wire brush and matte oil for a soft, tactile surface that hides fine wear.
5 colours
Indicative pricing band $$$ · formal quote on request
Technical specification
What sits beneath the finish.
- Species
- Oak
- Construction
- Engineered · 3-ply
- Wear layer
- 4 mm
- Total thickness
- 14 mm
- Board width
- 190 mm
- Board length
- up to 1900 mm
- Grade
- AB · minimal knots
- Surface treatment
- Wire-brushed · matte oil
- Colour
- Untinted natural oak
- Janka hardness
- 4.9 kN
Care & maintenance
How this floor ages well.
- 01Vacuum weekly with soft-brush attachment or micro-fibre mop dry.
- 02Damp-mop with a pH-neutral timber cleaner every 2–4 weeks — never wet-mop or use vinegar/ammonia.
- 03Wipe spills within 60 seconds — timber tolerates moisture briefly, not standing water.
- 04Re-oil high-traffic areas every 3–5 years to refresh matte finish.
- 05Sand & recoat the whole floor once every 15–25 years — engineered floors accept 2–3 sandings.
Where it works best
Application by room.
- Living rooms
- Bedrooms
- Kitchens (with mats at wet zones)
- Hallways
- Home offices
Warranty
25-year residential structural · 10-year residential wear
Sustainability
FSC/PEFC-certified oak · low-VOC UV-cured finish · engineered format uses ~60% less prime oak than solid boards
From the same element
