Tile · Large-format · Matte
Concrete-look Porcelain
Matte honed
Digitally printed porcelain replicating the raw, cementitious look of polished concrete without the cracking, staining or laitance of a real poured slab. R11-rated for wet areas — the studio's default for indoor-outdoor open-plan houses.
5 colours
Indicative pricing band $$ · formal quote on request
Technical specification
What sits beneath the finish.
- Material
- Full-body porcelain (concrete-look)
- Format
- 600 × 1200 mm large-format
- Thickness
- 10 mm
- Finish
- Matte cementitious texture
- PEI rating
- PEI IV
- Slip resistance (wet)
- AS 4586 · P4 / R11
- Water absorption
- ≤ 0.05%
Care & maintenance
How this floor ages well.
- 01Sweep or vacuum daily to remove abrasive grit that scratches finish.
- 02Damp-mop with pH-neutral cleaner weekly — avoid acidic or bleach-based products on honed finishes.
- 03Seal cementitious grout once at install and refresh every 3–5 years to prevent staining.
- 04For polished porcelain, re-polish with diamond-pad service every 8–10 years.
- 05Wipe up citrus, wine and coffee within minutes to protect grout lines.
Where it works best
Application by room.
- Kitchens
- Bathrooms (with correct slip rating)
- Living areas
- Alfresco (frost-safe)
- Wet rooms
Warranty
Lifetime material warranty · 10-year colour/wear
Sustainability
Contains 20–40% recycled content · Cradle-to-cradle recyclable at end of life · Zero-VOC surface
From the same element
